Posted on 12 Comments

Weaving Looms Part 1

Contents

Loom

      Loom:

The loom is the tool used by weavers to produce a weaved fabric.The shape, the size and the components of the loom vary according to the width and specifications of the product.

Hand weaving looms can be generally categorized into: simple looms, tapestry and carpet looms, table looms and floor looms. Each category has its own subcategories which will be demonstrated later on, followed by a brief about drawlooms and jacquard loom. The first part of the article will discuss simple looms, tapestry and carpet looms and table looms. The second part is going to discuss floor looms with their subcategories along with drawlooms and hand jacquard loom.

The article will handle the demonstration of looms through several main points: The main composition of the loom, the warp tension on the loom, how to insert and join the weft and the loom’s advantages and disadvantages. In addition, the distinct main item in every loom will be pinpointed

        1- Simple Loom:

This category comprises 3 main looms: The frame loom, the rigid heddle loom and the inkle loom.

        a. Frame Loom:

This is the simplest type of hand looms, as it consists of a frame made of wood, metal or plastic. On this frame partially or entirely, a set of pigs are fixed ; they are used for pulling the warp threads on them with the order the weaver defines, which is usually the same area as the desired product.

The weaver usually raises the warp with his own hand or using a wooden bar, a metal bar or a weaving needle for inserting the weft and creating the ornamental design he/ she wants. In addition, the weft’s threads are joined using an external reed or any other similar tool.

The frame loom has many shapes and sizes which depend on the shape and dimensions of the desired product. For example, there are circular, rectangular and triangular frame looms. The images below illustrate some shapes of the frame loom.

Different shapes of the frame loom

The weft between the threads and the ruler shuttle to insert the warp

Circular frame loom

A frame loom with the warp and weft illustrated

Advantages

– Simplicity, as it can be implemented using very simple tools which can come in handy for whoever needs to make a simple fabric or artistic picture or even get trained on the basic weaving principles.

– Easy portability.

Disadvantages

– It can’t be used for weaving a relatively large fabric.

– It requires defining the product’s size before starting.

– Its production rate is quite low.

        b. Rigid Heddle Loom:

It’s a frame loom but includes 2 beams, a back beam called “warp beam” on which the warp threads are wrapped, and a front beam called “cloth beam” on which the weaved fabric is wrapped.

The rigid heddle loom is distinguished from the frame loom by the reed which is mainly a wood or plastic board having longitudinal holes with little openings in between. The warp threads are inserted in each hole or opening, so that the reede, if lifted up, could pull up the warp threads in the openings but leave those in the longitudinal holes, likewise, if the reed is lifted down. This helps create the shed, which is the space formed among the warp threads for passing the weft threads through.

The weft threads are inserted in the shed using a ruler shuttle or weaving shuttle as illustrated in the picture. The weft threads are drawn together to form the fabric using the reed itself. This reed is manufactured with different dimensions according the density of the desired fabric. The images below illustrate the shape of a rigid heddle loom along with the reed of different dimensions and shapes.

Rigid heddle loom

Plastic reed

Wooden reed

Different-sized rigid reeds

Assemblable reeds

 

Weaving shuttle

Weaving shuttle

Advantages :

– A piece of cake to install!

– You can carry it anywhere

– It can weave long fabrics.

– You can easily make fabrics for yourself or your loved ones

– It can be used for creating product samples.

– It’s easier to use than the frame loom.

Disadvantages:

– Low production rate.

– The rigid heddle becomes useless when designing and implementing fabrics with complex patterns.

– The warping process requires training.

        c. Inkle Loom:

The inkle loom is considered a basic loom; bands can be made using rigid heddle looms but inkle looms are more convenient to use for this purpose. Inkle looms consist of a set of pigs fixed to a wood frame; the warp threads are wrapped around these pigs at the length desired for the band, but you don’t have to pass all the warp threads on all the pigs.

The warp threads are divided into 2 sets; sets are lifted by hand one at a time in order to create the shed. However, a particular number of threads can be lifted in a certain order allocated by the design in mind.

In addition, the inkle loom can be used for card weaving so as to implement more complex patterns of bands. These cards are made from different materials: wood, cardboard or plastic as illustrated in the pictures.

The weft is usually inserted using a ruler shuttle. Several forms and designs of bands can be carried out depending on their usage such as belts and clothes stripes

Shaaraf Inkle loom

Warped inkle loom

Card weaving by inkle loom

Paper weaving cards

Wooden weaving cards

Card weaving by inkle looms with different band patterns

Plastic weaving cards

Different and distinctive patterns of bands made by inkle looms

 Advantages:

– Easy to install

– It can be carried anywhere.

– It can be used for weaving very long bands after adjusting the number of pigs.

– It has a relatively high production rate.

Disadvantages:

– Warping and using require training.

– Card weaving requires training.

– Training requires reading and implementing the design.

– Problems may arise in warping in case the desired band is as wide as the pigs.

        2. Tapestry loom:

Tapestry looms are one of the basic looms to install because they usually consist of 2 beams, one for the warp and the other for the cloth, along with a tension tool in order to maintain the warp tension all over the weaving process. Very highly tensioned warp is one of the features of tapestry  looms.

There are 2 major types of these looms: horizontal and vertical, they both do the same job regarding the difference in position relative to the ground. In horizontal looms, the warp threads are parallel to the ground whereas in the the vertical looms they are perpendicular to the ground; hence vertical looms are more space-saving than horizontal looms. Plus, the weaver can see the whole product or the part carried out at the moment. In the next image is a horizontal loom and you can see that one product is fluffless; it’s called Kleem. The other products are fluffy.

Horizontal loom

 

The heddle is used for lifting the warp threads and forming the shed required for passing the weft. The heddle consists of a thread ring containing another ring into which the warp threads pass, so that a warp thread is pulled when its respective heddle is pulled.

In this kind of weaving, the weft is passed by hand without using a shuttle and it is joined by a manual heddle called the beater as they need to be threaded up strictly. The following images illustrate the tapestry and carpet loom as well as the heddle and the thread.

Vertical carpet loom

Vertical hanging rug loom

Vertical hanging rug loom

 

Advantages

– easy to install.

– easy to use.

Disadvantages

– low production rate.

– requires very high tension for the warp threads.

         3. Table loom:

The table loom is the type of loom which has shafts. The shaft is a wooden or plastic frame that contains a certain number of heddles, either the the thread or metal heddles, in order to pass a certain set of warp threads and control lifting or leaving the shaft. This is intended for forming the pattern that is required to implement on the fabric. The table loom’s name comes from thr fact that it is usually no wider than 75 cm and it’s laid on a table. Even if legs have been attached to it, they would be only for making it steady.

The loom consists of a back warping beam and a front cloth beam along with a tension maintaining system. Sometimes, it contains 2 warping beams for creating fluff in the fabric.

The table loom usually contains 4 shafts or more up to 16 shafts. Each shaft controls a certain number of warp threads and is lifted via a lever system in most table looms; one lever is used for each shaft.The loom in the illustrating image below has 8 shafts, four of which are lifted up so that the required shed can be formed to push the weft thread into it (not depicted in the image).

The weft is inserted by either a ruler shuttle or a weaving shuttle and it is drawn together by means of a reed pushed by hand. Table looms are used for educating and for making production samples or in some tailor studios to produce fabric that is fit for tailoring.

Shaaraf Yasmina Table Loom
Table loom
 8-shaft table loom with front levers
4-shaft table loom with side levers

4-shaft table loom with upper levers

 

8-shaft table loom with upper levers

Advantages

– There are so many designs you can implement with 4 shafts or more; this gives a great designing capacity and potential.

– Simple design.

– Easy to connect the shafts with the levers.

– Easy to disassemble and reassemble.

– Easy to add more shafts or remove some of them.

– Easy to use.

Disadvantages:

– In wide looms, the load on the levers increases which makes the weaver exert more effort to lift the levers.

– Tension is irregular on all the threads during weaving because only 1 part of the warp is lifted.

There have been discussed simple looms with their subcategories along with rigid heddle looms and table looms. The rest of hand weaving looms are going to be discussed in the second part of the article, in shaa Allah.

Dr. Osama Abdel-Monem Abdel-Halim Shaaraf

12 thoughts on “Weaving Looms Part 1

  1. Hello, thanks for your comment. Well, you may subscribe to our newsletter via the section on the page footer. Just enter your email address and you’re done. Thanks a lot.

  2. setting up and adjustment requirements for the range of looms and equipment in the enterprise and the range of woven textiles produced

    1. Hello Mr/ Ms Denizatm, thanks a lot for reading and commenting. Is there anything we can help you with?

  3. Ola, queria saber o seu prezo.

    1. Hola. ¿Qué producto, por favor?

  4. موضوع جميل وشيق

  5. Hi, I wanted to know your price.

  6. Ciao, volevo sapere il tuo prezzo.

  7. Прывітанне, я хацеў даведацца Ваш прайс.

  8. ما انسب نول للتدريب و العمل به لمريض التوحد ١٣ عام

  9. ما انسب نول للتدريب و العمل به لمريض التوحد ١٣ عام

  10. Salut, ech wollt Äre Präis wëssen.

Leave a Reply to Osama Sharaf Cancel reply

Your email address will not be published. Required fields are marked *